A wooden bridge built in 1825 is still standing in the hills of upstate New York, and you can walk across it today. That alone is remarkable, because an uncovered timber bridge of that era would have rotted out in a couple of decades. The secret is the roof. America’s historic covered bridges are practical engineering that happens to look like a postcard, and roughly 800 of them survive across more than 30 states.
These structures are rewarding to visit because each one has a story. Some carried farm wagons to market, some were swept away by floods and rebuilt plank by plank, and one inspired a bestselling novel and a Hollywood film. Here’s how they work, where to find the best ones, and how to plan a trip around them.
Why Early Americans Put Roofs on Bridges
The common romantic answer is that the roofs sheltered travelers and horses from rain. The real reason is far more practical. A wooden truss exposed to rain, snow, and sun might last 20 years. A truss protected by a roof and siding could last a century or more.
Builders were protecting the structure itself, not the people crossing it. The roof kept moisture away from the joints, where rot starts, and the siding blocked wind-driven rain. Timber was cheap and plentiful in the early 1800s, and roofing a bridge was far less expensive than replacing it every generation.
The Golden Age of Timber Spans
Covered bridges spread quickly after 1805, when the Permanent Bridge opened over the Schuylkill River in Philadelphia. By the mid-1800s, thousands were being built in nearly every region with forests and rivers. Skilled local carpenters often built them with hand tools, wooden pegs called trunnels, and timbers cut from nearby woodlots.
The decline came with iron, steel, and eventually concrete, which could span wider gaps and carry heavier loads. Floods, fires, and neglect claimed many of the rest. The survivors are a small fraction of what once existed, which is part of why each one feels special.
Reading the Trusses: What You’re Actually Looking At
Step inside a covered bridge and look up. The crisscrossing beams overhead are the truss, and its design tells you about the era and the builder. You don’t need an engineering degree to enjoy this, just a few patterns to recognize.
- Burr arch truss: Patented by Theodore Burr in 1817, this design pairs heavy timber arches with a straight-line truss. You’ll see big curved beams running along the sides, and it’s common in Pennsylvania, Ohio, and Indiana.
- Town lattice truss: Ithiel Town patented this in 1820. It uses a dense web of diagonal planks that looks like a woven fence, and it was cheap to build with ordinary lumber.
- Howe truss: William Howe’s 1840 design combined wood with iron vertical rods, which could be tightened as the timber shrank. It was widely used in the railroad era.
- Long truss: Stephen Long’s design uses heavy wooden panels with diagonal bracing and adjustable wedges, and it shows up often in New England and the Mid-Atlantic.
Look for the small details too. Some bridges still carry painted signs warning drivers to walk their horses or face a fine, a leftover from a time when galloping across a timber deck could damage it. Others have initials, dates, and carved messages from generations of visitors.
Where to Find the Best Covered Bridges in America
Covered bridges cluster in specific regions, which makes it easy to build a trip around several in a weekend. Each area has its own character, from white clapboard in New England to red-painted spans in Oregon.
New England: The Postcard Classics
Vermont has about 100 covered bridges, and many sit beside white churches and village greens. The Cornish-Windsor Bridge, which crosses the Connecticut River between New Hampshire and Vermont, is the longest wooden covered bridge in the United States at 449 feet. It dates to 1866 and carries two-way traffic, so you can drive across it.
New Hampshire adds dozens more, and many are found in tiny towns where the bridge is the main landmark. This region is at its best in autumn, so it’s worth checking our guide to fall foliage spots by region before you pick a weekend.
Pennsylvania, Ohio, and Indiana: The Heartland Collections
Pennsylvania has more covered bridges than any other state, with over 200 scattered through Lancaster, Bedford, and Bucks counties. Bedford County alone has around a dozen, and some are located along back roads that are lovely to drive.
Indiana’s Parke County bills itself as the Covered Bridge Capital of the World, with more than 30 bridges inside a small area. Its Covered Bridge Festival draws large crowds each October, so book lodging early if you plan to attend. Ohio rounds out the region with well over 100 bridges, including several in Ashtabula County that are among the longest in the state.
The Midwest Icons and the Pacific Northwest
Madison County, Iowa, is famous for the six bridges that inspired the novel and film The Bridges of Madison County. The Roseman Bridge, built in 1883, is the best known. It was damaged by arson in 2002 and rebuilt, which is a reminder of how vulnerable these structures are.
Out west, Oregon has around 50 covered bridges, and Lane County is often called the Covered Bridge Capital of the West. The Office Bridge near Westfir, built in 1944, is about 180 feet long and is among the most photographed. Western bridges tend to be built from Douglas fir and often have windows cut into the sides that let in light.
Planning a Covered Bridge Road Trip
The best covered bridge trips are slow ones. Many bridges sit on rural roads that aren’t on the fastest route anywhere, so you’ll want time to wander. If you enjoy that style of travel, our piece on what you find on America’s old highways pairs well with this kind of itinerary, and so does the advice in road trips that don’t feel rushed.
Build a Loop, Not a List
Pick one county or small region and plan a loop. Parke County, Lancaster County, and Bennington County, Vermont, each offer a dozen or more bridges within an easy drive. Local tourism offices often publish driving maps with turn-by-turn directions, and they’re worth picking up because bridge locations can be tricky to find on a phone map.
Aim for three to five bridges per day. That gives you time to walk through each one, take photos, and stop for lunch in a nearby town. Trying to hit ten in a day turns the trip into a scavenger hunt and you’ll remember less of it.
Timing and Practical Details
Early morning and late afternoon give you the best light and the fewest visitors. Fall draws the biggest crowds, but spring and early summer have their own appeal, with green banks, high water, and quieter roads. Winter snow can make a bridge look like a holiday card, though rural roads may be poorly plowed.
Some bridges are still open to vehicles, and others are pedestrian-only. Check weight and height limits before you drive through, since many spans have low clearance. If a bridge is closed to cars, park well off the road and don’t block farm access.
Photographing and Visiting Respectfully
A covered bridge is one of those subjects that looks good in almost any light, but a few choices make your photos stand out. Shoot from the riverbank to show the reflection, then step inside and shoot down the length of the deck, where the roof beams create strong leading lines. If you want more ideas, our travel photography tips cover composition basics that work well here.
Interior shots can be tricky because the contrast is high. Expose for the bright opening at the far end and let the shadows stay rich, or bracket your exposures if your camera allows it. A small tripod helps, but be mindful of traffic.
Leave the Bridge as You Found It
Fire and vandalism remain real threats to wooden bridges. Never smoke, light candles, or use fireworks near one. Resist the urge to carve your initials into the timbers, even though plenty of earlier visitors did. Those old marks are part of the history, but new ones add to the wear on structures that are already fragile.
Preservation: Why These Bridges Still Matter
Covered bridges survive because people decided they were worth saving. The National Society for the Preservation of Covered Bridges, formed in 1959, has helped document and protect them for decades. A federal program that began in the late 1990s has also funded repairs, and many counties now run their own restoration efforts.
Restoration is slow, skilled work. Craftspeople replace rotted timbers with matching wood, rebuild trusses with traditional joinery, and sometimes add hidden steel supports so a bridge can carry modern loads. Vermont’s Bartonsville Bridge was destroyed by Hurricane Irene flooding in 2011 and rebuilt by the community using traditional methods, a good example of how much people value these spans.
Visiting helps. Tourism dollars support the towns that maintain these bridges, and many are surrounded by the kind of walkable villages we described in our look at main streets that still feel like another era. Stop for a meal, buy something from a local shop, and you’re helping keep the whole landscape intact.
A Roof Over a River, a Reason to Slow Down
Covered bridges ask you to do something unusual in modern travel: slow down and look closely. Pick a region, whether that’s a Vermont river valley, Indiana farm country, or the green hills of western Oregon, and plan a loop of four or five spans. Bring a camera, a county map, and a little patience.
Roll your windows down as you cross, listen to the tires on the old planks, and notice the smell of aged timber. Then get out and walk through one on foot. A 150-year-old bridge feels very different when you take your time on it.

Leave a Reply